Toro 20330 - Low Wheel Walk Power Mower - Brake Arm Assembly

6-33WPM Drive Systems Manual
Brake Arm Assembly
BBC / BOS / BCS
A. Tab B. Notch
16. The bushing has a notch removed from the fl ange
end. Align that notch in the bushing with the tab in
the anchor plate (Fig. 219).
Fig 219 MVC-257
1. Place the spacer with the large diameter down on
the brake arm (Fig. 220).
Fig 220 MVC-211
Fig 222 MVC-216
3. Install the belt, belt guide, and carriage bolt on the
brake arm and secure with the carriage bolt (Fig.
222).
Fig 221 MVC-213
2. Place the bearing with the fl ange side down on the
spacer and place the washer on top of the bearing
(Fig. 221).
A
A
B
B