1-4 WPM Drive Systems Manual
WORM DRIVE TRANSMISSION
4. Remove both front wheels and wheel covers (Fig.
005).
Fig 005 3428-0129
5. Pivot (both) front spring arms forward until they
point straight down. (This removes the tension from
the pivot arms so the roll pin can be removed) (Fig.
006).
Fig 006 3428-0131
2. Raise the front of the mower off the bench and
support it with blocks.
3. Disconnect the shift cable.
Fig 004 3428-0127
1. Remove the belt cover and unhook the spring on
the front of the transmission. Slip the belt off the
transmission pulley (Fig. 004).
A. Cable Clamp C. Spring
B. Shift Cable
A
B
C
Removal & Installation (front wheel drive
applications)
To Next Page
Loading...
