7-8 WPM Drive Systems Manual
HANDLES AND CONTROL CABLES
Adjusting the Personal Pace/Easy Stride
Cable
Ensure the transmission belt is disengaged, transmission
tilted forward. Loosen the cable clamp on the handle.
When you pull the cable down the Personal Pace/Easy
Stride handle should raise to the stop. Hold the cable
and secure the clamp (Fig. 243).
Fig 243 DSC-4829
The engine stop cable is not adjustable. If it does not
function, it must be replaced.
The self propel cable is adjustable through a clamp. It
should be adjusted so that lowering the bail about 1”
(25mm) disengages the self propel. This is a gap that is
comfortable for most operators.
Fig 244 3428-0049
The 2 bail style is shown here (Fig. 244). The top bail is
the engine stop. Release it and the ignition is grounded
and a brake comes on to help stop the fl ywheel. The
lower bail is the self propel bail. Squeeze it to tension the
belt and drive the transmission.
Lawn-Boy 2 Bail Handle
To Next Page
Loading...
