3-22 WPM Drive Systems Manual
SINGLE SPEED BEVEL GEAR TRANSMISSION
13. Push the bearings and bearing retainers inward,
towards the transmission (Fig. 100).
Fig 100 MVC-297
Fig 101 PICT-1923
14. Unhook the traction cable from the transmission belt
guide (Fig. 101 and Fig 102).
11. Remove klip ring, keyed thrust washer, and standard
thrust washer (left side of mower has the standard
thrust washer, right side does not) (Fig. 098).
Fig 098 PICT-1915a
12. Remove the snap ring, pivot arm and spring arm
(Fig. 099).
Fig 099 PICT-1921a
To Next Page
Loading...
