EasyManua.ls Logo

Toro 20373 - Filling the Engine with Oil

Toro 20373
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure5
1.Recoil-starterrope2.Ropeguide
4
FillingtheEnginewithOil
NoPartsRequired
Procedure
Important:Yourmachinedoesnotcomewithoilin
theengine.Beforestartingtheengine,lltheengine
withoil.
Max.ll:0.59L(20oz),type:SAE30orSAE10W-30
detergentoilwithanAPIserviceclassicationofSF,SG,SH,
SJ,SL,orhigher.
Note:Whenthecrankcaseisempty,pourabout3/4of
thecrankcasecapacityofoilinthecrankcase,thendothe
following:
1.Movethemachinetoalevelsurface.
2.Removethedipstick(Figure6).
G017323
Figure6
1.Theoillevelisatits
maximum.
3.Theoillevelistoo
low—addoiltothe
crankcase.
2.Theoillevelistoo
high—removeoilfrom
thecrankcase.
3.Wipethedipstickcleanwithacleancloth.
4.Insertthedipstickintotheoil-lltubebutdonot
screwitin,thenremovethedipstick.
5.Readtheoillevelonthedipstick(Figure6).
Iftheoillevelonthedipstickistoolow,slowly
pourasmallamountofoilintotheoil-lltube,
wait3minutes,andrepeatsteps3through5until
theoillevelonthedipstickisatthecorrectlevel.
Iftheoillevelonthedipstickistoohigh,drainthe
excessoiluntiltheoillevelonthedipstickisat
thecorrectlevel.RefertoChangingtheEngine
Oil(page17).
Important:Iftheoillevelinthecrankcaseistoo
lowortoohighandyouruntheengine,youmay
damagetheengine.
6.Installthedipsticksecurely.
Important:
Change the engine oil after the r st 5
operating hour s
;changeityearlythereafter.Refer
toChangingtheEngineOil(page17).
7

Related product manuals