Step
2
Installing the Fuel Tank and
the Fuel Line
Parts needed for this step:
2
Self-tapping screw
1
Fuel tank
Procedure
1. Slide the end of the fuel line onto the elbo w
fitting ( Figure 4 ).
Figure 4
1. Fuel tank 3. Fuel line
2. Elbow tting 4. Fuel line clamp
2. Secure the fuel line in place with the fuel line
clamp ( Figure 4 ).
3. Slide the plastic clips on the front of the fuel
tank onto the fuel tank mount ( Figure 5 ).
Figure 5
1. Plastic clip (2)
4. Secure the bottom of the fuel tank to the
fuel tank brac k et b y installing the self-tapping
screws from the bottom. Do not o v er tighten
the scr ews.
Step
3
Filling the Crankcase with
Oil
No Parts Required
Procedure
T he engine crankcase is shipped without oil. Y ou
m ust fill it with appro ximately 30 oz. (0.88 L) of
oil before star ting the engine . R efer to Chec king
the Engine Oil Lev el in Operation , pag e 10 for oil
specifications and instr uctions .
8
To Next Page
Loading...
