19
1
2
m–5190
Figure 17
1. Lower Control Bar
(Engaged)
2. Handle
1
m–4185
2
Figure 18
1. Lower Control Bar
engaged and mower in
reverse.
2. Pull up to assist machine
Stopping the Machine
To stop the machine, pull back on the upper control bar,
release the blade control bail (PTO), and turn the ignition
key to “OFF” to stop the engine. Also set the parking
brake if you leave the machine unattended; refer to
Setting the Parking Brake, page 16. Remember to remove
the key from the ignition switch.
Children or bystanders may be injured if they
move or attempt to operate the machine while it is
unattended.
Always remove the ignition key and set the
parking brake when leaving the machine
unattended, even if just for a few minutes.
Caution
Transporting Machines
Use a heavy-duty trailer or truck to transport the machine.
Ensure that the trailer or truck has all necessary lighting
and marking as required by law. Please carefully read all
the safety instructions. Knowing this information could
help you, your family, pets or bystanders avoid injury.
To transport the machine:
• Lock brake and block wheels.
• Securely fasten the machine to the trailer or truck with
straps, chains, cable, or ropes.
• Secure a trailer to towing vehicle with safety chains.
To Next Page
Loading...
