12
Adjust Drop Speed
Refer to Adjusting the Cutting Unit Flow Control in
Traction Unit Operator’s Manual.
Check Chain Tension
New chains will stretch during the first few days of
operation, therefore; check chain tension frequently. If
chain requires adjustment, refer to Adjusting Chain.
Check Castor Wheel Tire
Pressure
Castor wheel tires to be inflated to 50 psi.
Important Before the rotary brush is operated, it must
be greased to assure proper lubricating characteristics: refer
to Lubrication section of manual. Failure to properly grease
the unit will result in premature failure of critical parts.
To Next Page
Loading...
