6
Setup
Note: Use this chart as a checklist to ensure that all parts have been received. Without these parts, total setup cannot be
completed.
Description
Qty. Use
Lift arm assembly (R.H. & L.H.)
Spacer (GM 4100 only)
Pin assembly (GM 4100 only)
Screw 3/8 x 1–1/4” lg.
Flat washer .406 x .813
Flange lock nut 3/8
Connection channel
2
2
2
10
10
10
1
Attach lift arms to traction unit
Spacer
Thrust washer
Screw 3/4 x 6–1/2” lg.
Flat washer .813 x 1.500
Jam nut 3/4
2
4
2
2
2
Attach lift arms to brush assembly
Flat washer 1.063 x 2.000
Cotter pin
Screw M6–1 x 60
Lock nut M6
1
1
1
1
Attach hydraulic cylinder to brush assembly
Cover assembly
Retaining ring
Flat washer 3/8 x 7/8
Retaining knob
1
1
1
1
Attach cover assembly to brush assembly
Hose assembly (extension)
Hose assembly (extension)
Straight fitting w/ o–ring
1
1
1
Connect traction unit hoses to brush
(GM 4100 only)
ORS plug w/ o–ring (–6)
ORS plug w/ o–ring (–12)
Cap plug w/ o–rIng (–6)
Cap plug w/ o–rIng (–12)
7
4
6
4
Plug unused hydraulic hoses & ports
Wire harness cap
Cable tie
1
1
Plug into the traction unit wire harness to
protect terminals
Cable tie 4 Secure hydraulic hoses
Operator’s manual 2 Read before operating the machine.
Parts catalog 1
Declaration of conformity 1
To Next Page
Loading...
