Groundsmaster 4000--D/4010--D Page 7 -- 3 Chassis
Disassembly (Fig. 1)
1. Park machine on a level surface, lower cutting
decks, stop engine, apply parking brake and remove
key from the ignition switch.
2. DisassemblesteeringtowerasneededusingFigure
1 as a guide.
Assembly (Fig. 1)
1. Assemble steering tower using Figure 1 as a guide.
A. Thrust washer(s) (item 24) on steering column
are used as needed to remove end play of steering
shaft.
B. If steering wheel was removed, torque hex nut
that secures steering w heel from 16 to 20 ft--lb (22
to 27 N--m).
Chassis
To Next Page
Loading...
