Groundsmaster 4000--D/4010--D Hydraulic SystemPage 4 -- 27
40 GPM Hydraulic Tester (Pressure and Flow)
Use to test hydraulic circuits and components for flow
andpressurecapacitiesasrecommendedintheTesting
sectionofthischapter.Thistesterincludesthefollowing:
1. LOAD VALVE: A simulated working load is created
in the circuit by turning the valve to restrict flow.
2. PRESSURE GAUGE: Glycerine filled 0 to 5000 PSI
gauge to provide operating circuit pressure.
3. FLOWMETER: This meter measures actual oil flow
in the operating circuit with a gauge rated from 4 to 40
GPM (20 to 150 LPM).
Toro Part Number: AT40002
NOTE: Thistesterdoesnotincludehoses(seeHydrau-
lic Hose Kit TOR6007 below).
Figure 19
Hydraulic Hose Kit
Thiskitincludesfittingsandhosesneededtoconnect40
GPM hydraulic tester (AT40002) or high flow hydraulic
filterkit(TOR6011)tomachinehydraulictractionsystem
components.
Toro Part Number: TOR6007
Figure 20
Hydraulic
System
To Next Page
Loading...
