Toro 30857 - Lift Cylinder Service

Groundsmaster 4500--D/4700--DHydraulic System Page 4 -- 132
Lift Cylinder Service
1. Tube assembly
2. Lock nut
3. Wear ring
4. Seal
5. Piston
6. O--ring
7. O--ring
8. Back--up ring
9. Seal
10. Retaining r ing
11. Head
12. Wiper
13. Rod assembly
14. Grease fitting
Figure 111
12
10
9
5
7
4
2
3
11
1
8
6
13
14
10
5
2
11
6
13
14
12
9
7
4
3
1
8
See text for torque
specification
NOTE: The lift cylinders used on the Groundsmaster
are all very similar regardless of the locationon the ma-
chine. The lift cylinders used on Groundsmaster
4700--D#6and#7liftarmshavea0.750”(19mm)diam-
eter rod. All other lift cylinders used on Groundsmaster
4500--D and 4700--D have a 0.630” (16 mm) diameter
rod. The disassembly and assembly procedure is the
same for all lift cylinders.