Toro 30857 - General Information; Operators Manual; Cutting Deck Identification

Groundsmaster 4500--D/4700--DPage 7 -- 2Chassis
General Information
Operator’s Manual
TheTractionUnitandCuttingDeckOperator’sManuals
provide information regarding the operation, general
maintenance and maintenance intervals for your
Groundsmaster machine. Refer to these publications
for additional information when servicing the machine.
Cutting Deck Identification
Cutting decks on the Groundsmaster 4500--D and
4700--D are identified as shown in Figure 1.
Figure 1
#4 Deck #1 Deck #5 Deck
#7 Deck
(GM4700)
#6 Deck
(GM4700)
#3
Deck
#2
Deck
CUTTING DECK LOCATIONS