Toro 31950 - Installing Wire Harness Brackets; Installing Forward Wire Harness Bracket

g280318
Figure5
1.Lefttaillightassembly3.Left,uppergussetplate
(axle-frametube)
2.Push-infastener(harness)
4
InstallingtheWireHarness
Brackets
Partsneededforthisprocedure:
2Wireharnessbracket
InstallingtheForwardWire
HarnessBracket
1.Removethe2angelocknuts(1/2inch),2
capscrews(1/2x4-1/2inches),and2washers
(1/2inch)thatsecuretheclevistothehitchtube
(Figure6).
g280308
Figure6
1.Flangelocknut(1/2inch)4.Capscrew(1/2x4-1/2
inches)
2.Clevis
5.Harnessbracket
3.Washer(1/2inch)
2.Aligntheholesintheharnessbracketwiththe
holesintheclevisasshowninFigure6
3.Assembletheharnessbrackettotheclevis
withthe2capscrews,2washers,and2ange
locknutsthatyouremovedinstep1.
4.Torquethelocknutsandcapscrewsto67to83
N∙m(91to113ft-lb).
4