GB–24
4. Clean the snowthrower. Touch up chipped
surfaces with paint. Toro Re-Kote paint is
available from an Authorized TORO Service
Dealer. Sand affected areas before painting, and
use a rust preventative to prevent metal parts
from rusting.
5. Tighten all screws and nuts. If any part is
damaged, repair or replace it.
6. ST
ORE SNOWTHROWER—Cover
snowthrower and store in a clean, dry place out
of the reach of children.
NEVER ST
ORE
SNOWTHROWER IN HOUSE (LIVING
AREA) OR BASEMENT WHERE
IGNITION SOURCES MA
Y BE PRESENT
SUCH AS HOT WATER AND SPACE
HEA
TERS, CLOTHES DR
YERS, AND THE
LIKE
BECAUSE GASOLINE AND FUMES
ARE HIGHL
Y FLAMMABLE,
EXPLOSIVE, AND DANGEROUS IF
INHALED.
Allow engine to cool before storing
in any enclosure.
To Next Page
Loading...
