Toro 38657 - Filling the Engine with Oil; Checking the Tire Pressure

Figure16
1.Cableclip2.Deectorcable
7.HoldthebluetriggercapdownandrotatetheQuick
Stickinacircletoensurethatthechuteanddeector
operatesmoothly.
5.ConnectingtheWiretothe
Headlight
1
Cabletie
Procedure
1.Insertthewireconnectoronthelooseendofthe
wirestraightintothebackoftheheadlightuntilitis
securelyinplace(Figure17).
Figure17
1.Plasticcliponwire
connector
3.Cabletie
2.U-bolt
Note:Ensurethattheplasticcliponthewire
connectorisonthebottom(Figure17).
2.Secureacabletie(fromtheloosepartsbag)around
thewireandthehandleaboutaninch(2.5cm)below
theU-bolt(Figure17).
6.FillingtheEnginewithOil
Procedure
Yoursnowthrowercomeswith28oz.ofoilinthe
enginecrankcase.
Note:Beforestartingtheengine,checktheoillevel
andaddoilifnecessary.
Max.ll:28oz.(0.83l),type:automotivedetergentoil
withanAPIserviceclassicationofSF,SG,SH,SJ,SL,
orhigher.UseSAE5W30orSAE10W30oil.Referto
yourengineowner’smanual.
1.Removethedipstickandslowlypouroilintothe
oillltubetoraisetheoilleveltotheFullmarkon
thedipstick.Donotoverll(Figure18).Referto
CheckingtheEngineOilLevelinMaintenance.
Figure18
2.Installthedipsticksecurely.
Note:Donotspilloilaroundtheoillltube;oil
couldleakontotractionpartsandcausethetraction
toslip.
7.CheckingtheTirePressure
Procedure
Thetiresareoverinatedatthefactoryforshipping.
Reducethepressureequallyinbothtirestobetween17
and20psi(116and137kPa).
8.CheckingtheSkids
Procedure
RefertoCheckingandAdjustingtheSkidsin
Maintenance.
10