Toro 38657 - Replacing the Headlight Bulb; Replacing the Drive Belts

Figure57
1.Dischargechutelatch
2.Gearteeth
Note:Thelatchisspringloadedandwillnaturally
moveintotheteethofthegear(Figure57).
4.Removeanyslackinthecablebypullingthecable
conduitrearward.
5.Tightentheboltonthecableclamp.
6.Installandsecurethegearcover.
ReplacingtheDriveBelts
Iftheauger/impellerdrivebeltorthetractiondrivebelt
becomesworn,oil-soaked,orotherwisedamaged,go
towww .Toro.comforadditionalserviceinformationor
haveanAuthorizedServiceDealerreplacethebelt.
ReplacingtheHeadlightBulb
UseaGE89216Whalogenlightbulb.Donottouch
thebulbwithyourhandsorallowdirtormoistureto
comeintocontactwiththebulb.
1.Removethewireconnectorfromthebackofthe
headlight(Figure58).
Figure58
2.Turnthebaseofthebulbcounterclockwiseuntilit
stops(Figure59).
Figure59
3.Removethebulbstraightoutfromthebackofthe
headlight(Figure60).
Figure60
4.Insertanewbulbintothebackoftheheadlight
(Figure61).
Figure61
24