Toro 51831 - Installing the Auxiliary Handle

2
InstallingtheAuxiliaryHandle
Partsneededforthisprocedure:
1Auxiliaryhandleassembly
–
Screwdriver(notincluded)
Procedure
1.UsingaPhillipsheadscrewdriver,separatetheauxiliaryhandlefromthehandleplatebyremoving
the2screws(AofFigure4).
2.Lineuptheauxiliaryhandlewithauxiliaryhandleplateonthetrimmerhandle(BofFigure4).
3.Securetheauxiliaryhandletothehandleplatewiththe2previouslyremovedscrews(CofFigure4).
g331072
Figure4
9