MODEL/SERIAL NUMBER LOCATION
The tractor model and serial number plate
location is shown in the illustration.
The engine has its own model and serial
number identification. Consult the appropriate
engine manufacturer’s service literature for the
location and translation of the engine model
and serial number information.
GREASING AND LUBRICATION
Service Interval/Specification
The machine should be greased every 50 hours
or yearly, whichever occurs first. You should
grease more frequently when operating
conditions are extremely dusty or sandy. See
the maintenance table in section 1c.
Grease Type: General-purpose lithium base
grease
Lubrication Points
There are 3 grease zerks on the front axle; one
on at each spindle and one at the center pivot.
2.0757.015
2.0109.043
2.0109.033
22
CHASSIS
2-4 5xi Series Tractor Service Manual
To Next Page
Loading...
