Toro WorkmanR e2050 User Manual

Part No. 04127SL (Rev. D)
Service Manual
Workman
R
e2050 & e2065
Preface
The purpose of this publication is to provide the service
technician with information for troubleshooting, testing
and repair of major systems and components on the
Workman e2050 and e2065.
REFER TO THE OPERATOR’S MANUAL FOR OPER-
ATING, MAINTENANCE AND ADJUSTMENT IN-
STRUCTIONS. Space is provided in Chapter 2 of this
book to insert the Operator’s Manuals and Parts Cata-
logs for your machine. Replacement Operator’s Manu-
als are available on the Internet at www .toro.com.
The Toro Company reserves the right to change product
specifications or this publication without notice.
This safety symbol means DANGER, WARNING
or CAUTION, PERSONAL SAFETY INSTRUC-
TION. When you see this symbol, carefully read
the instructions that follow. Failure to obey the
instructions may result in personal injury.
NOTE: A NOTE will give general information about the
correct operation, maintenance, service, testing or re-
pair of the machine.
IMPORTANT: The IMPORTANT notice will give im-
portant instructions which must be followed to pre-
vent damage to systems or components on the
machine.
E Th e Toro Company -- 2004, 2006, 2007, 2011

Toro WorkmanR e2050 Specifications

General

Brand	Toro
Model	WorkmanR e2050
Category	Tractor
Language	English

Summary

Preface

Chapter 1 - Safety

Safety Instructions

Guidelines for safe operation, maintenance, and storage of the Workman vehicle.

Jacking and Other Instructions

Procedures for safely jacking, towing, and transporting the Workman vehicle.

Safety and Instruction Decals

Information on the importance and replacement of safety and instruction decals on the vehicle.

Chapter 2 - Product Records and Maintenance

Product Records

Instructions for inserting operator manuals and parts catalogs for the Workman vehicle.

Equivalents and Conversions

Tables for decimal/millimeter conversions and U.S. to Metric conversions.

Torque Specifications

Recommended torque values for various fasteners and their identification.

Chapter 3 - Electrical System

Electrical Diagrams

Reference to electrical schematic, circuit drawings, and harness drawings in Chapter 6.

General Information

Overview of the 48-volt DC electrical system and battery circuit.

Vehicle Operation

Explanation of the electrical system's role in vehicle operation and controller functions.

Special Tools

Description of essential special tools like multimeters and battery protection sprays.

Troubleshooting

Diagnostic information for common run problems, battery charger issues, and system faults.

Adjustments

Procedures for adjusting accelerator switch, potentiometer, and system calibration.

Component Testing

Testing procedures for various electrical components like switches, lights, and sensors.

Service and Repairs

Detailed service and repair procedures for batteries, motors, and chargers.

Chapter 4 - Transaxle and Brakes

Specifications

Details on transaxle fluid capacity and type.

Troubleshooting

Common brake problems and their potential causes for Workman e2050/e2065.

Adjustments

Procedure for adjusting the brakes on the Workman e2050.

Service and Repairs

Procedures for servicing rear wheels, brakes, transaxle, and hydraulic brake systems.

Chapter 5 - Chassis

Specifications

Tire pressure and wheel torque specifications for the Workman vehicle.

Troubleshooting

Diagnosing common suspension and steering problems for the Workman vehicle.

Service and Repairs

Procedures for checking tire pressure, inspecting tires/wheels, and steering system maintenance.

Upper Steering

Detailed breakdown and service instructions for the upper steering components.

Lower Steering (Workman e2050)

Service procedures for the lower steering assembly, including spindles and tie rods.

Front Wheels and Lower Steering (Workman e2065)

Service instructions for front wheels, hubs, bearings, and steering components on e2065.

A-arm and Frame Pivot Yoke

Procedures for removing and installing the A-arm and frame pivot yoke.

Pivot Yoke Removal

Step-by-step instructions for removing the pivot yoke from the vehicle frame.

Seat Base

Disassembly and installation instructions for the seat base assembly.

Front Hood

Procedures for removing and installing the front hood and related components.

Cargo Bed

Instructions for removing and installing the cargo bed assembly.

Chapter 6 - Electrical Diagrams

ELECTRICAL SCHEMATIC

Comprehensive electrical schematic showing all circuits and components of the vehicle.

ELECTRICAL CIRCUIT DRAWINGS

Detailed circuit diagrams for specific operational modes like ON/OFF, Forward, and Charging.

ELECTRICAL HARNESS DRAWINGS

Diagrams illustrating the electrical harness layout and wiring for Workman e2050 and e2065.