2. Check the adjustment of link (A) which
connects the lower steering plate (B) to the
bell crank (C). To do this:
A. Align the front wheels straight ahead so that the
front of the lower steering plate is square to the
frame rails of the tractor. Verify the alignment by
placing a straight edge across the front edge of
the lower steering plate (A), aligning it with the
foot rest support (B) as described on page 2-10.
Note: Keep wheels aligned straight ahead
except where noted.
B. Check the slider (D) making sure it is all the way
down, flush with top of spacer (E).
IMPORTANT: There must be a slight vertical
looseness (F) in the slider or there may be
binding in the pedal linkages. Lift up on the
slider to check.
2.0144.059
2.0144.087
2.0109.043
2
CHASSIS
5xi Series Tractor Service Manual 2-17
To Next Page
Loading...
