Toro 74268CP - Page 49

Figure70
1.Hotuidlevel-full2.Colduidlevel-full
Hydraulicuidescapingunderpressurecan
penetrateskinandcauseinjury.
•Ifhydraulicuidisinjectedintotheskin
itmustbesurgicallyremovedwithinafew
hoursbyadoctorfamiliarwiththistypeof
injury.Gangrenemayresultifthisisnot
done.
•Keepbodyandhandsawayfrompinhole
leaksornozzlesthatejecthighpressure
hydraulicuid.
•Usecardboardorpapertondhydraulic
leaks.
•Safelyrelieveallpressureinthehydraulic
systembeforeperforminganyworkonthe
hydraulicsystem.
•Makesureallhydraulicuidhosesand
linesareingoodconditionandallhydraulic
connectionsandttingsaretightbefore
applyingpressuretohydraulicsystem.
ReplacingtheHydraulicFilterandOil
ServiceInterval:Aftertherst25hours—Changethe
hydrauliclter.
Yearly—Changethehydrauliclter
andoil.
Usesummerlterabove32°F(0°C)
Usewinterlterbelow32°F(0°C)
1.DisengagethePTO,movethemotioncontrollevers
totheneutrallockedpositionandsettheparking
brake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
Important:Donotsubstituteautomotiveoil
lterorseverehydraulicsystemdamagemay
result.
3.Placedrainpanunderlter,removetheoldlter
andwipethelteradaptergasketsurfaceclean
(Figure71).
Figure71
1.Hydrauliclter
4.Applyathincoattotherubbergasketonthe
replacementlter(Figure72).
5.Installthereplacementhydrauliclterontothelter
adapter.Donottighten.
6.Fillthehydraulictankwithhydraulicuiduntilthe
uidoverowsthelterandthenturntheoillter
clockwiseuntiltherubbergasketcontactsthelter
adapter,thentightenthelteranadditional1/2turn
(Figure72).
7.Cleanupanyspilleduid.
8.Adduidtothecoldlevelofthebafeinthe
hydraulictank.
9.Starttheengineandletitrunforabouttwominutes
topurgeairfromthesystem.Stoptheengineand
checkforleaks.Ifoneorbothwheelswillnotdrive,
refertoBleedingHydraulicSystem.
10.Rechecktheuidlevelwhiletheuidiswarm.The
uidshouldbebetweencoldandhot.
11.Ifrequired,adduidtothehydraulictank.Donot
overll.
49