Toro 74268CP - User Manual

Questions and Answers:

D
Douglas ValenzuelaSep 9, 2025
What to do if the blades do not rotate on my Toro Lawn Mower?
- R
  Ryan WardSep 9, 2025
  If the blades on your Toro Lawn Mower aren't rotating, check these potential causes: * A worn, loose, or broken drive belt. Check the belt tension. * The drive belt is off the pulley. Install the drive belt and check adjusting shafts and belt guides for correct position. * A worn, loose, or broken deck belt. Install a new deck belt. * The deck belt is off the pulley. Install the deck pulley and check the idler pulley, idler arm and spring for correct position and function. * A broken or missing idler spring. Replace the spring.
P
Pamela AndersonSep 12, 2025
How to prevent my Toro Lawn Mower engine from overheating?
- M
  Melissa BowersSep 12, 2025
  If your Toro Lawn Mower engine overheats, consider the following: * Check and add coolant if more is needed. * Clean the (3) air intake screens with every use. * Inspect and clean the radiator screen with every use to ensure unrestricted airflow into the engine. * Clean the radiator fins. * Ensure the crankcase oil level is at the full mark by either filling or draining as necessary. * Replace the cooling fan belt if it is worn, loose, or broken. * Reduce the load by using a lower ground speed if there is excessive loading.
H
hutchinsonpaulSep 13, 2025
What causes abnormal vibration in my Toro Lawn Mower?
- C
  Cheryl SalasSep 13, 2025
  If your Toro Lawn Mower is experiencing abnormal vibration, several issues could be the cause. Start by checking the cutting blade(s) and install new ones if they are bent or unbalanced. Next, ensure the blade mounting bolt is tightened securely. Also, verify that the engine mounting bolts are tight. Furthermore, check for any loose engine pulley, idler pulley, or blade pulley and tighten the appropriate pulley. For issues related to a damaged engine pulley or a bent blade spindle, contact an Authorized Service Dealer.
T
tchapmanSep 15, 2025
What to do if the blades on my Toro 74268CP do not rotate?
- J
  John WalkerSep 15, 2025
  If the blades on your Toro Lawn Mower do not rotate, here’s what you should check. First, make sure the mower belt is properly installed on the pulley, and inspect the adjusting plate, idler arm and spring, and belt guides for correct positioning. If the mower belt is worn, loose, or broken, install a new one. For issues related to the electric clutch not engaging or being worn, contact an Authorized Service Dealer.
J
Jacob WilliamsSep 18, 2025
Why won't my Toro 74268CP drive?
- L
  Luis KingSep 18, 2025
  If your Toro Lawn Mower does not drive, start by checking the hydro fluid level and add hydro fluid to the reservoir if it is low. For issues related to a traction belt that is worn, loose, or broken, or a traction belt that is off the pulley, contact an Authorized Service Dealer.