Toro 74721 - Stopping the Machine; Adjusting the Height of Cut

Thefollowingareonlyrecommendationsforuse.
Adjustmentsvarybygrasstype,moisturecontent,
andtheheightofthegrass.
Suggested
uses:
TrimTowMow
ParkingX
Heavy,wet
grass
X
TrainingX
BaggingX
MulchingX
Normal
mowing
X
TransportX
Trim
Thisisthelowestspeed.Thesuggestedusesforthis
speedareasfollows:
•Parking
•Heavy,wetgrassmowingconditions
•Training
Tow
Thisisthemediumspeed.Thesuggestedusesfor
thisspeedareasfollows:
•Bagging
•Mulching
Mow
Thisisthefastestspeed.Thesuggestedusesforthis
speedareasfollows:
•Normalmowing
•Transportingthemachine
StoppingtheMachine
Tostopthemachine,movethemotion-control
leverstoNEUTRALandoutwardtothePARKposition,
disengagetheblade-controlswitch,ensurethatthe
throttleisintheFASTposition,andturntheignition
keytoOFF.Removethekeyfromtheignitionswitch.
WARNING
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhile
itisunattended.
Alwaysremovetheignitionkeyandmove
themotion-controlleversoutwardtothe
PARKpositionwhenleavingthemachine
unattended,evenifjustforafewminutes.
AdjustingtheHeightofCut
Note:Thetransportpositionisthehighest
height-of-cutpositionat115mm(4-1/2inches)as
showninFigure22.
g027504
Figure22
21