What to do if my Toro 74722 starter does not crank?
If the starter on your Toro Lawn Mower isn't cranking, try the following: Ensure the blade-control switch is disengaged. Make sure the motion-control levers are in the PARK position. Check the battery and charge it if it's dead. Inspect the electrical connections for corrosion or looseness, ensuring they have good contact. Replace the fuse if it's blown.
Why is there an abnormal vibration in my Toro 74722 Lawn Mower?
An abnormal vibration in your Toro Lawn Mower can stem from a few sources. Check if the engine-mounting bolts are loose and tighten them. Also, inspect the engine pulley, idler pulley, or blade pulley for looseness and tighten the appropriate pulley. If the cutting blade(s) is/are bent or unbalanced, install a new cutting blade(s). Finally, check if a blade-mounting bolt is loose and tighten it.
How to fix abnormal vibration in my Toro 74722 Lawn Mower?
Abnormal vibration can be caused by: * Loose engine mounting bolts, which you should tighten. * A loose engine pulley, idler pulley, or blade pulley; tighten the appropriate pulley. * Bent or unbalanced cutting blade(s); install a new cutting blade(s). * A loose blade mounting bolt; tighten the blade mounting bolt.
General| Drive System | Hydrostatic |
|---|---|
| Mulching Capability | Yes |
| Bagging Capability | Optional |
| Side Discharge Capability | Yes |
| Deck Material | Steel |
| Drive Type | Rear-wheel drive |
| Starter Type | Electric |
| Speed Control | Variable |
To Next Page
