What to do if my Toro Lawn Mower starter does not crank?
If the starter on your Toro Lawn Mower isn't cranking, try the following: Ensure the blade-control switch is disengaged. Make sure the motion-control levers are in the PARK position. Check the battery and charge it if it's dead. Inspect the electrical connections for corrosion or looseness, ensuring they have good contact. Replace the fuse if it's blown.
Why is there an abnormal vibration in my Toro 74730 Lawn Mower?
An abnormal vibration in your Toro Lawn Mower can stem from a few sources. Check if the engine-mounting bolts are loose and tighten them. Also, inspect the engine pulley, idler pulley, or blade pulley for looseness and tighten the appropriate pulley. If the cutting blade(s) is/are bent or unbalanced, install a new cutting blade(s). Finally, check if a blade-mounting bolt is loose and tighten it.
How to fix abnormal vibration in my Toro 74730?
Abnormal vibration can be caused by: * Loose engine mounting bolts, which you should tighten. * A loose engine pulley, idler pulley, or blade pulley; tighten the appropriate pulley. * Bent or unbalanced cutting blade(s); install a new cutting blade(s). * A loose blade mounting bolt; tighten the blade mounting bolt.
General| Model | 74730 |
|---|---|
| Power Source | Gasoline |
| Cutting Width | 30 in (76 cm) |
| Weight | 234 lbs (106 kg) |
| Drive System | Rear-Wheel Drive |
| Deck Material | Steel |
| Start Type | Recoil |
| Fuel Capacity | 0.5 gallons |
| Cutting Height | 1.5 - 4.5 in (3.8 - 11.4 cm) |
| Fuel Tank Capacity | 0.5 gallons |
| Self-Propelled | Yes |
| Type | Walk Behind |
| Engine Type | 4-Stroke |
| Wheel Size | 8 in (20.3 cm) Front, 10 in (25.4 cm) Rear |
Health hazard warning for California residents regarding product chemicals.
Essential guidelines for safe use and injury prevention.
Specific precautions and techniques for mowing on inclines.
Critical safety procedures for refueling and storing fuel.
Additional safety information specific to Toro riding mowers.
Warnings about blade contact, thrown objects, and general hazards.
Procedures for refueling the machine to prevent fire or explosion.
Safe procedure for adding gasoline and using stabilizer.
Ensuring proper engine lubrication before starting.
Rules for safe mowing, hazard avoidance, and sound protection.
Specific dangers and precautions for mowing on inclines.
Testing and understanding critical safety features.
Step-by-step guide to start the mower engine.
Importance and function of the discharge deflector for safety.
Precautions for loading onto trailers or trucks to prevent tip-overs.
Intervals for servicing the mower components.
Warning about leaving the key in the ignition switch.
Checking and specifying oil for the engine.
Step-by-step instructions for engine oil replacement.
Procedure for replacing the engine oil filter.
Hazards associated with gasoline and fuel system work.
Precautions for handling, removing, and installing the battery.
Procedures for checking, sharpening, and replacing blades.
Ensuring the deck is properly aligned for an even cut.
Setting the correct angle for the cutting deck.
Diagnosing issues with engine ignition, starting, and power loss.
To Next Page
