Toro AERATOR HC 4000 User Manual

IDENTIFICATION AND ORDERING
MODEL AND SERIAL NUMBERS
The HC 4000 aerator has two identification numbers: a model num-
ber and a serial number. The two numbers are stamped into a plate
which is located on the upper rear frame channel. In any correspon-
dence concerning the mower, supply the model and serial numbers
to assure that correct information and replacement parts are
obtained.
To order repIacement parts from an authorized TORO Distributor,
supply the foIlowing information:
1. Model and serial numbers of the machine.
2. Part number, description and quantity of parts desired.
Note: Do not order by reference number if a parts cataIog is being
used; use the part number.
20

Toro AERATOR HC 4000 Specifications

General

Brand	Toro
Model	AERATOR HC 4000
Category	Lawn and Garden Equipment
Language	English