Toro Dingo 320-D - Maintenance; Recommended Maintenance Schedule

Maintenance
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst8hours
•Replacethehydrauliclter.
•T orquethewheellugnutsto50ft-lb(68N⋅m).
Aftertherst50hours
•Changetheengineoilandlter.
Beforeeachuseordaily
•Drainwaterfromthefuellter.
•Checktheengineoillevel.
•Checktheenginecoolantlevel.
•Removedebrisfromthetractionunit.
•T esttheparkingbrake
•Checkthetirepressure.
•Greasethetractionunit.
•Checkforloosefasteners.
Every25hours
•Checkthehydraulicuidlevel.
•Checkthehydrauliclinesforleaks,loosettings,kinkedlines,loosemounting
supports,wear,weather,andchemicaldeterioration.
Every75hours
•Changetheengineoilandlter(morefrequentlywhenoperatingconditionsare
extremelydustyorsandy).
•Checkthebatteryelectrolytelevel.(Replacementbatteryonly)
•Checkthebatterycableconnections.
Every100hours
•T orquethewheellugnutsto50ft-lb(68N⋅m).
Every200hours
•Replacetheprimaryairlter.
Every400hours
•Replacethehydrauliclter.
Every600hours
•Replacethesafetyairlter.
Every1,500hours
•Replaceallmovinghydraulichoses.
Yearly
•Changethefuellter.
•Changethehydraulicuid.
Yearlyorbeforestorage
•T ouchupchippedpaint
Important:Refertoyour Engine Operator’ s Man ual foradditionalmaintenanceprocedures.
CAUTION
Ifyouleavethekeyintheignitionswitch,someonecouldaccidentlystarttheengineandseriouslyinjure
youorotherbystanders.
Removethekeyfromtheignitionbeforeyoudoanymaintenance.
26