Why does my Toro Lawn and Garden Equipment engine overheat?
If your Toro Lawn and Garden Equipment engine overheats, it could be due to an excessive engine load; try reducing the ground speed. Also, ensure that the oil level in the crankcase is adequate by adding oil if needed. Check for and remove any obstructions from the cooling fins and air passages to ensure proper ventilation.
What to do if the traction unit does not drive on my Toro Lawn and Garden Equipment?
If the traction unit of your Toro Lawn and Garden Equipment does not drive, first check if the flow divider valve lever is in the 9 o’clock position and move the lever to the 12 to 10 o’clock position. Also, add hydro fluid to the reservoir.
General| Engine Make | Kubota |
|---|---|
| Fuel Type | Diesel |
| Engine Gross Power | 22 hp |
| Horsepower | 22 hp |
| Rated Operating Capacity (35% of Tip) | 1, 000 lbs (454 kg) |
| Travel Speed | 6.5 mph (10.5 km/h) |
| Ground Speed | 6.5 mph (10.5 km/h) |
| Height | 46 in |
| Fuel Capacity | 6.5 gal (24.6 L) |
Guidelines for safe operation and avoiding injury.
Precautions and best practices for operating on slopes to prevent accidents.
Recommended maximum slopes for safe operation based on configuration.
Detailed instructions and safety precautions for fueling the unit.
Explanation of all controls and their functions.
Understanding speed selection and hydraulic flow control.
Procedures for safely starting and stopping the engine.
Instructions for driving the unit forward, backward, and turning.
Procedures for installing, removing, and connecting attachments.
A schedule of maintenance tasks based on operating hours.
Procedures for changing engine oil and filter.
Maintenance procedures for the hydraulic system.
Diagnosing and resolving issues when the starter motor doesn't engage.
Troubleshooting common engine starting and running problems.
Troubleshooting why the traction unit is not moving.
To Next Page
