Toro Dingo 323 - Installing the Rear-Wheel Hubs

6
InstallingtheRear-Wheel
Hubs
Partsneededforthisprocedure:
2Wheel-hubassembly
2Hublocknut
Procedure
1.Cleantherear-driveshaftsandtheinsideofthe
taperedboreofthewheelhubswithalcoholora
degreaser(Figure16).
g020939
Figure16
1.Rear-driveshaft(leftside)
2.Disengagetheparking-brakelever.
3.Placethepreviously-removedkeysintotheslots
inthedriveshafts.
4.Placethenewwheelhubsontothedriveshafts
(Figure17).
g020940
Figure17
1.Wheelhub(leftside)
5.Securethehubswithnewhublocknuts.
6.Torquethenutsto406to474N∙m(300to350
ft-lb).
7.Installtherearwheels.
8.Torquethewheellugnutsto68N∙m(50ft-lb).
8