Toro Dingo 323 - Traction Unit Components

14
Tire pressure
Maintain the air pressure in the tires as specified. Check
the tires when they are cold to get the most accurate
reading.
Pressure: 15-20 psi.
Note: Use a lower tire pressure (15 psi.) when operating
in sandy soil conditions to provide better traction in the
loose soil.
1
m–1872
Figure 6
1. Valve stem
Operation
Note: Determine the left and right side of the machine from the normal operating position.
Traction Unit Overview
Figure 7 contains a front and back view of the traction unit. Familiarize yourself with all of the traction unit components
listed in Figure 7.
m–4393/4389
5
1
3
2
6
7
8
9
10
11
12
11
3
4
13
14
15
15
Figure 7
1. Mount plate
2. Tilt cylinder
3. Loader arms
4. Lift cylinder
5. Fuel tank
6. Wheel
7. Operator platform
8. Engine
9. Air filter
10. Control panel
11. Lift points
12. Handle
13. Auxiliary hydraulic couplers
14. Hood
15. Tow valve