Toro ECXTRA Sprinkler Timer User Manual

23
Setting an Interval Schedule
Turn the control dial to the watering days
position.
Check the programs switch setting. If necessary,
reposition the switch to select the desired program.
The current watering schedule will be displayed. If
Int (Interval) is not displayed, press the +/on or –/off
button as needed to select Int.
Press the next button. The current Interval number
(1–7) will begin flashing.
To change the Interval number, press the +/on or
–/
off button until the desired number is flashing.
Press the next button. The Interval start day will
begin flashing.
To change the Interval start day, press the +/on
button or the –/off button until the desired day is
flashing.
8. To set an Interval schedule for another program,
repeat all of the steps beginning at step.
When you have completed setting the Interval
schedule for each program (as needed), return the
control dial to the run position.
Note: The Day Exclusion feature enables you to
select any day(s) of the week to be excluded and
remain off when using an Interval or Odd/Even
watering schedule. See page 25 for detailed
information.
7
6
2
3
9
4
7
5
5
7
4
3
5
3
6
1

Toro ECXTRA Sprinkler Timer Specifications

General

Brand	Toro
Model	ECXTRA Sprinkler Timer
Category	Timer
Language	English