EasyManua.ls Logo

Toro FLX35-6 Series User Manual

Toro FLX35-6 Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Introduction
The FLX35-6 and FLX55-6 series full and part circle rotary
sprinklers are designed specifically for golf course applications.
Manufactured from durable, high-strength engineering plastic and
stainless-steel components, these sprinklers incorporate many
innovative and time-proven features for lasting, maintenance-free
operation.
Prior to installing the sprinkler, read through the recommended
installation and start-up procedures. Please observe all Warnings
and Cautions when installing and operating this equipment.
Features
• Adjustable Part circle (40°-330°) and true uni-directional full circle (360°) arc coverage
• Arc adjustment in 5° increments
• TruJectory
TM
main nozzle trajectory adjustment from 7°-30° in 1° increments
• TruJectory adjustment is graphically illustrated from the top
• TruJectory is adjustable wet or dry
• Ratcheting riser in 2° increments
• Nozzle base clutching
• One back nozzle position
• Industry’s largest precision nozzle selection
• All nozzles are color coded, debris tolerant and threaded in from the front
• Five electric and two hydraulic activation types
o Electric – Satellite systems – Standard 24 VAC solenoid; SPIKEGUARD 24VAC solenoid; Nickel plated
SPIKEGUARD 24VAC solenoid
o Electric – 2-wire systems – DC Latching solenoid; Integrated GDC module w/DC latching solenoid
o Hydraulic – Normally Open valve in head; Check-O-Matic (requires remote valve)
• Constant velocity drive and variable stator provide consistent rotation speeds
• Manual control at the sprinkler ON-OFF-AUTO (electric models only)
• Selectable/lockable pressure regulation settings; 50 psi (3,4 bar), 65 psi (4,5 bar), 80 psi (5,5 bar) or 100 psi (6,9 bar)
• Indestructable stainless steel valve seat and valve communication tube
• Body inlet rock screen serviceable from the top
• All internal components are serviceable from the top of the sprinkler
Specifications and Performance/Application Data
FLX35-6 Series
Radius: 42'–92' (12,8–28,1 m)
Flow Rate: 7.1–45.3 GPM (26,9–171,5 LPM)
Trajectory: Selectable 7°–30°
Arc: Full Circle (360°) or adjustable part circle (40°–330°)
Recommended Operating Pressure:
65–100 PSI (4,5–6,9 Bar)
Minimum Pressure: 40 PSI (2,8 Bar)
Maximum Pressure: 150 PSI (10,3 Bar)
Precipitation Rate:
Minimum: 0.37"/hr (9,4 mm/hr)
Maximum: 0.53"/hr (13,5 mm/hr)
Body Height: 10" (254 mm)
Pop-Up Height to Nozzle: 4 3/16" (106 mm)
Inlet Size: 1" (25 mm) NPT, BSP or ACME female thread inlet
Five electric activation types:
Standard Solenoid - 24 VAC, 50/60 Hz,
0.30 Amps Inrush, 0.20 Amps Holding
SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
Nickel Plated SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
DC Latching Solenoid - Momentary Low Voltage Pulse
Integrated GDC Module w/ DC Latching Solenoid -
Momentary Low Voltage Pulse
Manual Control (Electric only): On-Off-Auto
Check-O-Matic Model checks up to 37' (11,2 m) of elevation
Eight Nozzle Variations
FLX55-6 Series
Radius: 52'–100' (15,8–30,5 m)
Flow Rate: 13.9–61.1 GPM (52,6–231,3 LPM)
Trajectory: Selectable 7°–30°
Arc: Full Circle (360°) or adjustable part circle (40°–330°)
Recommended Operating Pressure:
65–100 PSI (4,5–6,9 Bar)
Minimum Pressure: 40 PSI (2,8 Bar)
Maximum Pressure: 150 PSI (10,3 Bar)
Precipitation Rate:
Minimum: 0.43"/hr (10,9 mm/hr)
Maximum: 0.60"/hr (15,2 mm/hr)
Body Height: 11" (289 mm)
Pop-Up Height to Nozzle: 4 3/16" (106 mm)
Inlet Size: 1.5" (40 mm) NPT, BSP or ACME
Five electric activation types:
Standard Solenoid - 24 VAC, 50/60 Hz,
0.30 Amps Inrush, 0.20 Amps Holding
SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
Nickel Plated SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
DC Latching Solenoid - Momentary Low Voltage Pulse
Integrated GDC Module w/ DC Latching Solenoid -
Momentary Low Voltage Pulse
Manual Control (Electric only): On-Off-Auto
Check-O-Matic Model checks up to 37' (11,2 m) of elevation
Nine Nozzle Variations
FLX35-6 & FLX55-6 Series Rotary Sprinklers
Installation and Service Instructions
Question and Answer IconNeed help?

Do you have a question about the Toro FLX35-6 Series and is the answer not in the manual?

Toro FLX35-6 Series Specifications

General IconGeneral
BrandToro
ModelFLX35-6 Series
CategoryIrrigation System
LanguageEnglish

Summary

Introduction

Features

Specifications and Performance/Application Data

Sprinkler Spacing Guidelines

Precipitation Rate Formulas

Toro Swing Joints

Wire Splices

Connecting Hydraulic Control Tubing

System Start Up

Winterization

Arc Adjustment Procedure

Adjustment Band Indicators

Markers on the adjustment band help set pre-determined arcs (90°, 180°, 270°, 360°).

Trajectory Adjustment Procedure

Fine-tune spray angle from 7°-30° using a nut driver for windy conditions or obstructions.

Pilot Valve Operation (Electric Models Only)

Troubleshooting

Sprinkler won't rotate

Addresses issues like debris wedged between stator and turbine or defective drive assembly.

Head sticks up

Covers problems with dirt in riser assembly or damaged/missing return spring.

Poor distribution pattern

Discusses issues like plugged or damaged nozzles and low operating pressure.

Valve won't close (Electric)

Explains causes like continuous 24 VAC to sprinkler or debris in pilot valve.

Servicing Sprinkler Mechanism

Servicing Main Valve

Servicing Pilot Valve

Flushing Sprinklers

Related product manuals