Toro GrandStand 74504TE - Lubrication; Greasing the Machine; Greasing the Torsion Idler

g270368
Figure37
3.Alignholesguardextensionoverthe2carriage
boltsandtheangeoftheextensionoverthe
openingsinengineguard(Figure38).
g270364
Figure38
1.Flangelocknuts
3.Carriagescrew
2.Flange(guardextension)
4.Assemblethe2angelocknutsontothe2
carriagebolts,andtorquethelocknutsto1978
to2542N∙cm(175to225in-lb).
Lubrication
GreasingtheMachine
GreasewithNo.2lithiumormolybdenumgrease.
1.DisengagethePTOandsettheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Cleanthegreasettingswitharag.
Note:Makesuretoscrapeanypaintoffthe
frontofthetting(s).
4.Connectagreaseguntothetting.
5.Pumpgreaseintothettingsuntilgreasebegins
tooozeoutofthebearings.
6.Wipeupanyexcessgrease.
GreasingtheTorsionIdler
ServiceInterval:Yearly
Important:Useonlyhigh-temperaturegrease.
Donotusegeneral-purposegrease.
1.Opentheengineguard;refertoOpeningthe
EngineGuard(page26).
2.Greasethetorsionidleronthemowerdeck
usinghigh-temperaturegreaseatthegrease
ttingshowninFigure39.
g235669
Figure39
1.Greasetting
3.Closetheengineguard;refertoClosingthe
EngineGuard(page26).
27