Toro GrandStand 74505 - Controls System Maintenance; Adjusting the Motion-Control Levers

7.Removethedeckbeltfromtheclutchandclutchstop
(Figure65).
8.Installthenewbelt.
9.Installthetensionspringandlowerhydraulichose.
10.Installthedrainplugs.
11.Addhydraulicuidtothelllevel.
12.Installthehydraulic-reservoircap.
13.Runthemachinefor10minutesandverifythatthe
hydraulicuidisatthecorrectlevel.
ControlsSystem
Maintenance
AdjustingtheMotion-Control
Levers
Ifthemotion-controlleversdonotalignhorizontally,adjust
therightsidemotion-controllever.
1.DisengagethePTO,movethemotion-controlleversto
theneutralposition,andsettheparkingbrake.
2.Shutofftheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Pushthemotion-controlleversdownoutofthe
NEUTRAL-LOCKposition(Figure66).
4.Checkiftherightmotion-controlleveraligns
horizontallywiththeleftmotion-controllever(Figure
66).
Figure66
1.Leftmotion-controllever3.Checkthehorizontal
alignmenthere
2.Rightmotion-controllever
intheNeutral-lockposition
4.Rightmotion-controllever
5.Toadjustthemotion-controllevershorizontally,you
mustadjustthecam.
6.Releasethecushionfromtherearofthemachine.
7.Loosenthenutholdingthecam(Figure67).
45