Toro Greensmaster 3320 TriFlex - Page 21

CuttingUnitPowerDisconnect
Connectors
Beforeinstalling,removing,orworkingonthecutting
units,disconnectthecuttingunitsfromthepower
supplybyseparatingthecuttingunitpowerdisconnect
connectors(Figure20),locatedatthebaseofthe
rolloverbarontheleftsideofthetractionunit.Plug
theconnectorstogetherbeforeoperatingthemachine.
g016588
Figure20
1.Cuttingunitpowerdisconnectconnector
CAUTION
Ifyoudonotdisconnectthepowertothe
cuttingunits,someonecouldaccidentally
startthecuttingunit,causingseriousinjury
tohandsandfeet.
Alwaysseparatethecuttingunitpower
disconnectconnectorsbeforeworkingonthe
cuttingunits.
Specications
Note:Specicationsanddesignaresubjectto
changewithoutnotice.
Note:Theweightlistedistheweightofthemachine
inthemostcommonconguration.
Thetotalweightincludesthetractionunitwiththree
11-bladecuttingunits.
Widthofcut151cm(59.5inches)
Wheeltread
128cm(50.5inches)
Wheelbase
119cm(46.9inches)
Overalllength(w/baskets)249cm(98.0inches)
Overallwidth179cm(70.6inches)
Overallheight205cm(80.8inches)
Weight
712kg(1569lb)
Attachments/Accessories
AselectionofT oroapprovedattachmentsand
accessoriesisavailableforusewiththemachine
toenhanceandexpanditscapabilities.Contact
yourAuthorizedServiceDealerorauthorizedT oro
distributororgotowww.T oro.comforalistofall
approvedattachmentsandaccessories.
Toensureoptimumperformanceandcontinuedsafety
certicationofthemachine,useonlygenuineToro
replacementpartsandaccessories.Replacement
partsandaccessoriesmadebyothermanufacturers
couldbedangerous,andsuchusecouldvoidthe
productwarranty.
21