Installing Lift Arms to Traction Unit
1. Mount lift arms to pivot brackets and lift cylinders
with pivot pins and 3/32” x 1–1/4” lg. cotter pins, supplied
with traction unit. Lift arms to be mounted with ball joint
ends positioned outward.
2. Hook brake return springs to holes in traction unit lift
arms.
1
2
3
Figure 11
1. Pivot pin
2. Lift arm
3. Lift arm pivot bracket
1
Figure 12
1. Brake return spring
Groundsmaster 223–D
Page 15 – 11
Rev. B
Guardian 62 Recycler Cutting Unit
To Next Page
Loading...
