Page 24 Operating Instructions
Figure 14: Hydraulic control valves
A. Conveyor belt direction (left control valve)
B. Raise and lower MH-400 (center control valve)
C. Options on and off (right control valve)
D. Option hydraulic quick connectors
Operating the Hydraulic Controls and
Options on EH Models
WARNING: Before operating the
MH-400, read and understand the entire
Operator’s Manual and all safety decals.
Figure 15: Control Pendant For EH Models
Control Pendant Legend
Floor Speed
Option Speed
Preset Setting
Not Used
Option start followed by belt start
To Next Page
Loading...
