41
TRANSAXLE MAINTENANCE
ADJUSTING SHIFT CABLES:
Check adjustment every 200 hours.
1. Place Range Selector in the Neutral position.
2. Remove clevis pins securing shift cables to
transaxle shift arms.
3. Loosen clevis jam nuts and adjust each clevis
so cable free play is equal forward and backward
relative to hole in transaxle shift arm (With
transaxle lever free play taken up in same
direction).
4. Reinstall clevis pins and tighten jam nuts after
adjustments have been attained.
1
1804
2
FIG. 27
1. Shift Arm (2nd - 3rd)
2. Shift Arm (1st - Reverse)
HYDRAULIC SYSTEM DIAGRAM
1698
To Next Page
Loading...
