50
SPRAYING SYSTEM
The MULTI PRO
®
1250 Turf Sprayer is a dedicated
spray application vehicle with optional Hose Reel,
Foam Marker, Sonic Boom, Respirator, Hand
Sprayer, and Roll Over Protection Structure
(ROPS) feature. Equipped with a positive
displacement pump which has pump speed
proportional to ground speed, pump flow is
automatically adjusted as ground speed
changes. As a result, the application rate remains
constant over a wide speed range. The system
includes Electric Boom Spray Controls located
on the operator's right console with Boom
Indicator Lights, a Main On/Off Boom Switch
located on the floorboard, and a Neutral Engine
Speed Control on the operator's left console for
use with the Hand Sprayer and during filling and
mixing. The Spray System itself consists of a
Diaphragm Spray Pump, a 160 gallon tank, Spray
Pro
application monitor, and three Boom
sections for precise application of material. This
unit is specially designed to improve the
accuracy and uniformity of spray applications.
1. Learn how to operate the Sprayer and how
to use the controls properly. DO NOT let anyone
operate this equipment without first receiving
thorough instructions.
2. Keep all shields, safety devices, and decals
in place. If a shield, safety device or decal is
malfunctioning, illegible or damaged, repair or
replace it before operating the machine.
3. Chemicals can injure persons, animals, plants,
soils or other property. To eliminate environmental
damage and personal injury:
A. Select the proper chemical for the job.
B. Carefully read the directions printed on
the chemical manufacturer's labels before
handling chemicals. Instructions on chemical
manufacturer's container labels regarding mixing
proportions should be read and strictly followed.
C. Keep spray material away from skin. If
spray material comes in contact with body, wash
it off immediately with clean water and detergent.
D. Always wear goggles and other personal
protective equipment as recommended by the
Chemical Manufacturer.
E. Properly dispose of chemical container
and unused chemicals.
MAINTENANCE:
4. Before servicing or making any adjustments
to the Sprayer:
A. Stop the vehicle and set the parking brake.
B. Shut off the vehicle's engine and remove
the key from ignition.
C. Disengage all power and wait until all
moving parts have stopped.
5. Keep all nuts, bolts, and other fasteners
tightened securely. Replace any shields removed
during servicing or adjustments.
6. To be sure of optimum performance and
safety, always purchase genuine TORO
replacement parts. Accessories made by other
manufacturer's could be dangerous. Altering this
equipment in any other manner may affect the
machine's operation, performance, and durability,
or its use may result in injury or death. Such use
could void the product warranty of The Toro
Company.
To Next Page
Loading...
