Toro Multi Pro 1250 - Page 53

53
TOTAL AREA
SPEED
UNITS
OF MEASURE
APP. RATE
TOTAL VOLUME
SUB
VOLUME
DISTANCE
SUB AREA
SEL
UNITS
TEST
SPEED
BOOM
SEL
WIDTH
SPEED
CAL
FLOW
CAL
RESET
CAL
-
+
CAL HOLD
1
SPRAY PRO
MP-1250
APPLICATION RATE: Displays current
application rate in US (GPA), Metric (L/Ha) or Turf
(Gal/1000 sq. ft.)units. The initial setting is for US
measurement.
SPRAY PRO

MONITOR MAIN FUNCTIONS
CALIBRATION VALUES:
The Spray Pro

comes programmed with values
for speed, flow, and Boom Width calibrations.
However, the Flowmeter and Speed Sensor
calibrations may be fine-tuned for optimum
performance.
The Spray Pro

Monitor does not control
application rate. It only displays information.
Below are the main functions of the Monitor. See
page 54 for QUICK START SPRAY GUIDE.
SELECTION DIAL:
SPEED: Displays ground speed in miles per
hour (kilometers per hour).
UNITS OF MEASURE: Displays current unit
selection as US, SI (METRIC) or TURF.
TOTAL AREA: Keeps a running count of the
total area covered. Resetable.
SUB AREA: Keeps a running count of individual
areas covered. Resetable.
2
FIG. 1
1789-1250-2
1
3
DISTANCE: Displays distance traveled in feet
(meters). Resetable.
TOTAL VOLUME: Displays total number of
gallons (liters) applied. Resetable.
SUB VOLUME: Keeps a running count of
individual volumes applied. Resetable.
1. Width 2. Boom Sel
3. Liquid Crystal Display
NOTES: