Toro Power Max 1428 OHXE - Replacing the Headlight; Storage; Storing the Machine; Removing the Machine from Storage

ReplacingtheHeadlight
Replacetheheadlightassembly(Toropartnumber138-0670)whenneeded.
1.Removetheheadlightwirefromthebackoftheheadlight(AofFigure35).
2.Removetheboltandnutholdingtheheadlightassemblyontotheheadlightbracketandthenremovethe
oldheadlightassembly(BofFigure35).
3.Securethenewheadlightassemblyontotheheadlightbracketwiththepreviouslyremovednutand
bolt(CofFigure35).
4.Inserttheheadlightwirestraightintothebackoftheheadlightuntilitissecurelyinplace(DofFigure35).
g256137
Figure35
Storage
StoringtheMachine
1.Onthelastrefuelingoftheyear,addfuel
stabilizertofreshfuelasdirectedbythefuel
stabilizermanufacturer.
Important:Donotstorefuellonger
thanthatsuggestedbythefuelstabilizer
manufacturer.
2.Runtheenginefor10minutestodistributethe
conditionedfuelthroughthefuelsystem.
3.Runthemachineuntiltheenginerunsoutoffuel.
4.Primetheengineandstartitagain.
5.Allowtheenginetorununtilitshutsoff.
Whenyoucannolongerstarttheengine,itis
sufcientlydry.
6.Allowtheenginetocool.
7.Removetheignitionkey.
8.Cleanthemachinethoroughly.
9.Touchupchippedsurfaceswithpaintavailable
fromanAuthorizedServiceDealer.Sand
affectedareasbeforepainting,andusearust
preventativetopreventthemetalpartsfrom
rusting.
10.Tightenallloosescrews,bolts,andlocknuts.
Repairorreplaceanydamagedparts.
11.Coverthemachineandstoreitinaclean,dry
placeoutofthereachofchildren.
RemovingtheMachine
fromStorage
Performtheannualmaintenanceproceduresasgiven
intheRecommendedMaintenanceSchedule;referto
Maintenance(page16).
22