Toro Power Max 824 OAE - Operating the Speed Selector; Operating the Auger;Impeller Drive; Operating the Quick Stick

OperatingtheSpeed
Selector
Thespeedselectorhas6forwardand2reverse
gears.Tochangespeeds,releasethetractionlever
andshiftthespeed-selectorlevertothedesired
position(Figure19).Theleverlocksinanotchat
eachspeedselection.
g001012
Figure19
Operatingthe
Auger/ImpellerDrive
1.Toengagetheauger/impellerdrive,squeeze
theright(auger/impeller)levertothehandgrip
(Figure20).
g001013
Figure20
2.Tostoptheaugerandimpeller,releasetheright
lever.
Important:Whenyouengageboththe
auger/impellerleverandthetractionlever,
thetractionleverlockstheauger/impeller
leverdown,freeingyourrighthand.To
releasebothlevers,simplyreleasetheleft
(traction)lever.
3.Iftheaugerandimpellercontinuetorotatewhen
youreleasetheauger/impellerlever,donot
operatethemachine.Checktheauger/impeller
cable;refertoCheckingandAdjustingthe
Auger/ImpellerCable(page22)andadjustitif
necessary.Otherwise,takethemachinetoan
AuthorizedServiceDealerforservice.
WARNING
Iftheaugerandimpellercontinue
torotatewhenyoureleasethe
auger/impellerlever,youcouldseriously
injureyourselforothers.
Donotoperatethemachine.Takeittoan
AuthorizedServiceDealerforservice.
OperatingtheQuickStick®
HoldthebluetriggercapdowntousetheQuickStick
tomovethedischargechuteandthechutedeector.
Releasethetriggercaptolockthedischargechute
andchutedeectorintoposition(Figure21).
g001014
Figure21
MovingtheDischargeChute
HoldthebluetriggercapdownandmovetheQuick
Sticktothelefttomovethedischargechutetothe
left;movetheQuickSticktotherighttomovethe
dischargechutetotheright(Figure22).
g018894
Figure22
16