Reelmaster 3550-- D Page 5 -- 15 Electrical System
Check Operation of Interlock Switches
CAUTION
Do not disconnect safety switches. They are for
the operator’s protection. Check the operation of
the interlock switches daily for proper operation.
Replace any malfunctioning switches before op-
erating the machine.
Interlock switch operation is described in the Traction
Unit Operator’s Manual. Your Reelmaster is equipped
with an Toro Electronic Controller (TEC) which monitors
interlock switch operation. Testing of individual interlock
switches and relays is included in the Component Test-
ing section of this Chapter.
NOTE: Use the Diagnostic Display (see Special Tools
in this chapter) to test Toro Electronic Controller inputs
and outputs before further troubleshooting of an electri-
cal problem on your Reelmaster.
To Next Page
Loading...
