EasyManua.ls Logo

Toro Reelmaster 3575-D - User Manual

Toro Reelmaster 3575-D
338 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Form No. 15213SL Rev H
Reelmaster
®
3550−D/3555−D/3575−D
Original Instructions (EN)

Table of Contents

Questions and Answers

  • B
    Beth JonesAug 9, 2025
    Why is the steering on my Toro Reelmaster 3575-D Lawn Mower inoperative?
    • D
      danafullerAug 10, 2025
      If the steering on your Toro Lawn Mower is inoperative or sluggish, there could be several reasons. The oil level in the hydraulic reservoir might be low, so fill the hydraulic reservoir with oil. Also, steering components may be worn or binding, so replace or repair worn or binding components. A damaged or open relief valve in the steering control valve could be the cause, so replace the damaged relief valve. Internal leaks in the steering cylinder can also cause this issue, so repair or replace the steering cylinder. A worn or damaged gear pump could also be the problem, so replace the gear pump.
  • J
    Joseph NelsonAug 14, 2025
    What to do if the gear pump on my Toro Lawn Mower is noisy?
    • M
      Matthew MurphyAug 14, 2025
      If the gear pump on your Toro Lawn Mower is noisy, specifically experiencing cavitation, there are a few potential causes. First, check the hydraulic tank oil level and fill the hydraulic tank if it is low. Second, inspect the suction line for any restrictions and clear them. Finally, examine the suction line for air leaks and repair any leaks found.
  • M
    Matthew SnyderAug 21, 2025
    How to fix power loss after cutting with my Toro Reelmaster 3575-D?
    • T
      theresamoralesAug 21, 2025
      If you're experiencing power loss after cutting, resulting in the cutting blades turning too slowly on your Toro Lawn Mower, there are several possible causes. The flow control in the mow control manifold might need adjustment, so adjust the flow control. Also, a faulty solenoid valve could be the issue, so replace the faulty solenoid valve. The relief valve may be out of adjustment or faulty, so adjust or replace the relief valve. Damaged cutting unit reel bearings can also cause this, so replace the damaged reel bearings.
  • J
    Jacob BaxterAug 27, 2025
    What to do if none of the cutting reels on my Toro Lawn Mower will turn?
    • W
      Warren RamirezAug 27, 2025
      If none of the cutting reels on your Toro Lawn Mower are turning, it could be due to a few reasons. The solenoid valve may be stuck open, so replace or repair the stuck solenoid valve. Another potential cause is a worn or damaged gear pump, so replace the gear pump.
  • K
    Kathryn SparksSep 2, 2025
    Why does turning the steering wheel turn my Toro Reelmaster 3575-D in the wrong direction?
    • D
      Donna HickmanSep 2, 2025
      If turning the steering wheel causes your Toro Lawn Mower to move in the wrong direction, it is because the hoses to the steering cylinder are reversed. Correctly connect the hoses to the steering cylinder.

Summary

Chapter 1 Safety

General Safety Instructions

Provides essential safety guidelines for operating, maintaining, and storing the Reelmaster machine.

Chapter 4 Hydraulic System

Hydraulic Schematics

Presents detailed hydraulic schematics for different machine models and circuits.

Hydraulic Flow Diagrams

Illustrates hydraulic flow paths for various circuits like traction, cutting unit, lift, and steering.

Testing

Outlines procedures and precautions for performing hydraulic system tests using specialized equipment.

Chapter 5 Electrical System

Chapter 7 DPA Cutting Units

Chapter 9 Universal Groomer (Optional)

Troubleshooting

Identifies mechanical issues with the groomer reel and provides correction methods.

Service and Repairs

Details service procedures for gear box, idler, groomer reel, grooming brush, and height adjuster assemblies.

Chapter 10 Foldout Drawings

Hydraulic Schematics

Presents detailed hydraulic schematics for Reelmaster 3550-D and 3555-D/3575-D models.

Electrical Schematics

Provides electrical schematics for various Reelmaster models and serial number ranges.

Wire Harnesses

Contains wire harness drawings for different Reelmaster models and serial number ranges.

Toro Reelmaster 3575-D Specifications

General IconGeneral
Number of Reels5
Fuel TypeDiesel
Reel DriveHydraulic
Cutting Width75 inches (190.5 cm)
Drive SystemHydrostatic
TransmissionHydrostatic

Related product manuals