Toro STX-38 - Removing the Bottom Shield; Lubrication; Greasing the Machine

RemovingtheBottom
Shield
Important:Thefastenersonthecoversofthis
machinearedesignedtoremainonthecoverafter
removal.Loosenallfastenersoneachcoverafew
turnssothatthecoverisloosebutstillattached,
thengobackandloosenthemuntilthecover
comesfree.Thispreventsyoufromaccidentally
strippingtheboltsfreeoftheretainers.
1.Parkthemachineonalevelsurface,engage
theparkingbrake(ifapplicable),andlowerthe
hydrauliclift.
2.Shutofftheengineandremovethekey.
3.Loosenthe2boltssecuringthebottomshield
sequentiallyuntiltheshieldisfree(Figure26).
g019847
Figure26
1.Bottomshield2.Bolts
4.Pulltheshieldbackandoutofthemachine.
5.Toinstalltheshieldbeforeoperatingthe
machine,slidethebottomshieldintothe
machinesothatitrestsonall4tabsandsecure
itwiththe2boltsyouloosenedpreviously
(Figure26).
Note:Youmayneedtoliftuponthebottom
shieldtoensurethatitrestsonthefronttabs.
Lubrication
GreasingtheMachine
ServiceInterval:Beforeeachuseordaily(Greaseit
immediatelyaftereverywashing.)
GreaseType:General-purposegrease
1.Parkthemachineonalevelsurface,engagethe
parkingbrake,andlowerthehydrauliclift.
2.Shutofftheengineandremovethekey.
3.Cleanthegreasettingswitharag.
4.Connectagreaseguntoeachtting(Figure27
throughFigure29).
5.Pumpgreaseintothettingsuntilgreasebegins
tooozeoutofthebearings(approximately3
pumps).
6.Wipeupanyexcessgrease.
g019848
Figure27
g025622
Figure28
22