Toro STX-38 - Page 40

g019862
Figure64
1.Nut3.Tooth
2.Toothholder
Cleaning
RemovingDebrisfromthe
Machine
ServiceInterval:Aftereachuse
Important:Operatingtheenginewithblocked
screens,dirtyorpluggedcoolingns,and/or
coolingshroudsremovedwillresultinengine
damagefromoverheating.
1.Parkthemachineonalevelsurface,engage
theparkingbrake(ifapplicable),andlowerthe
hydrauliclift.
2.Shutofftheengine,removethekey,andwait
fortheenginetocool.
3.Wipeawaydebrisfromtheaircleaner.
4.Cleananydebrisbuildupontheengineand
muferwithabrushorblower.
Important:Itispreferabletoblowdirt
out,ratherthanwashingitout.Ifyouuse
water,keepitawayfromelectricalitemsand
hydraulicvalves.Donotuseahigh-pressure
washer.High-pressurewashingcandamage
theelectricalsystemandhydraulicvalvesor
depletegrease.
Note:RefertoRemovingtheMuferCover
(page21)toaccessthemufer.
5.Cleandebrisfromtheoilcooler.
40