Toro Super Recycler 20057 - Folding the Handle; Removing the Mower from Storage

17
3352-860
Folding the Handle
1. Remove the
lower handle knobs
and detach the
lower handle
brackets (A) from
the lower end of
both handle sides.
A
m-8097
Note: Attach the lower handle knobs onto the
bolts in the handle to prevent losing them.
2. Rotate the handle forward.
A.
B.
m-8151
m-8150
3. To unfold the handle, refer to Unfolding the
Handle on page 4.
Removing the Mower from
Storage
1. Remove the spark plug and pull the recoil start
handle a few times to blow the excess oil from the
cylinder.
2. Install the spark plug and tighten it with a torque
wrench to 15 ft-lb (20 Nm).
3. Connect the wire to the spark plug.