Toro Super Recycler 21563 - Handle and Cutting Height Adjustment; Adjusting the Cutting Height

AdjustingtheHandleHeight
Youmayraiseorlowerthehandletoapositionthatiscomfortableforyou.RefertoFigure11forthisprocedure.
1.Rotatethehandlelocks.
2.Loosenthenutssothatthecarriageboltcanslideintothehigherorlowerposition.
3.Movethehandletothehigherorlowerposition.
4.Tightenthenuts.
5.Lockthehandlesintoposition
g371149
Figure11
1.Boltandhandleinstalledtothehigherhandleposition.2.Boltandhandleinstalledtothelowerhandleposition.
AdjustingtheCuttingHeight
DANGER
Adjustingthecutting-heightleverscouldbringyourhandsintocontactwithamovingblade
andresultinseriousinjury.
•Shutofftheengineandwaitforallmovingpartstostopbeforeadjustingthecuttingheight.
•Donotputyourngersunderthehousingwhenadjustingthecuttingheight.
CAUTION
Iftheenginehasbeenrunning,themuferwillbehotandcanburnyou.
Keepawayfromthehotmufer.
Adjustthecuttingheightasdesired.Setallwheelstothesamecuttingheight(Figure12).
12