Toro TEMPUS DC LCD User Manual

5
Toro TEMPUS DC LCD Controller 1
_
2
_
4
_
6
STEP 3
English
Thanks to its large display and keyboard TEMPUS DC LCD can be programmed without
Bluetooth.
OPERATION WITH BUTTONS
Display
Main Menu
Battery level indicator
Select menu button
Validation button
Setting button + or -
PAIRING
1. Unscrew the TEMPUS DC LCD’s cap
2. Plug the 9V alkaline battery or the 4 x 1,5V AAA battery pack. Screw the cap
3. Launch the TEMPUS DC App.
4. Tap on the «Add a module» button or on the «+» button.
5. Choose the TEMPUS DC LCD from the list of nearby controllers.
6. To finish the pairing of your TEMPUS DC LCD, follow the next steps described in
the app
7. After pairing, select the “Power source” (9V or AAA) in the APP, Information
Menu.
Starting Display

Toro TEMPUS DC LCD Specifications

General

Brand	Toro
Model	TEMPUS DC LCD
Category	Controller
Language	English